ATV UTV rules for Idaho
Sorry about the web site having issues. We are working on it. Here they are. If you need more info call me at 208-867-6943 Thanks, Dick Rockrohr
IDAHO RALLY 2011 ATV UTV RULES
(Adapted from WORCS competition rules)
CLASSES:
Utility ATV 250cc and up OME 4x4
Sportsman ATV 250-500cc production based
Unlimited ATV 250cc-up Open class
SBS CLASS 1 UTV UP TO 1000cc must have come with OEM rear cargo bed (may be removed for completion) Must have full roll cage. Any modification to any part of the SBS is allowed
SBS CLASS 2 UP TO 850cc Production based class. Must have full roll cage. Frame must have stock geometry. Motor center case must remain stock. No turbos
Or superchargers allowed.
SBS CLASS 3 UP TO 705cc Production based class. Must have full roll cage. Frame must have stock geometry. Motor center case must remain stock. No turbos or superchargers allowed.
SAFETY EQUIPMENT:
1. Helmets must be of the type approved by the Snell Memorial foundation 2000 or
newer. ATV should be full coverage type, UTV can be open faced. Straps must have
D ring fasteners. Helmets must be free of damage.
2. Protective clothing is required. Boots, shoulder pads, gloves, race pants, jersey and eye protection.
3. Must have 1 type ABC fire extinguisher on board.
Side by Side special rules:
1. Must have 4 point or more harness for each occupant.
2. Must have 2 type ABC fire extinguishers on board.
3. Side doors or nets are require to keep occupant legs within foot well
4. Full factory or improved roll cages must be intact.
5. Fuel cells are allowed.
All vehicles must be Idaho street legal and have either a regular license plate or an Idaho special use plate.
All entrants must have a valid driver’s license.
All modifications must be done in a safe and workman like manner.
Any questions or to arraign a pre tech call Dick 208-867-6943
MOTORCYCLE AND CAR RULES AVALIABLE IDAHORALLY.COM AND nasarallysport.com