Special Stage Forums banner
1 - 10 of 10 Posts

· You get one life,live it!
Joined
·
1,962 Posts
Discussion Starter · #1 ·
The Mini has the SES light on which the auto shop scanner says is the O2 senosr and the engine running cold. I changed the O2 sensor, thermostat and temperature sensor but the error codes are still there. I need a shop to either pin point the problem or cancel the codes out from the ECU for good.
 

· Registered
Joined
·
774 Posts
Unless the O2 code is for the heater, or no response, those codes are a response to another problem, like fuel trimming due to vacuum leak, pcv system failure, or failing/erronious maf signal, ect.

What are the exact codes? Maybe I can get you pointed in the right direction.
 

· You get one life,live it!
Joined
·
1,962 Posts
Discussion Starter · #7 ·
Once I get back to MA I'll get the codes. One thing i did hear was the PCV valve rattling so maybe that's faulty?
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top