Special Stage Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 · (Edited)
FS 92 Mazda MX3 GS - RA Stage Rally Car $7200 OBO

Or Best offer

Located in Kingman, AZ. Willing to deliver within 300 miles.

PHOTO LINK http://s345.photobucket.com/user/PeteH113/slideshow/

Purchased from our friend "theduckylittle" in MN.
Never raced, recently had job/life relocation and would like to sell it. This chassis has had two podiums (Headwaters 2016, Nemadji Trail 2015).

No rolls, spins, bumps, or otherwise bad things have happened to this car.

## Drivetrain

* JDM imported KL-ZE with KL-47 intake and ported throttle body. Previous owner verified the internal parts all have consistent part numbers with a KL-ZE but do not have the paper work.
* Recently rebuilt MX-3 GS Transmission with Mazdaspeed limited-slip differential.

## Suspension

* Hotbits with external reservoirs. Recently rebuilt by Larry Parker Racing.
* Solid pillow-ball top mounts with adjustable front camber.
* 2.5" Eibach springs in the front, Hypercoil springs in rear
* Removed front sway bar (included in spares)
* All of the front bushings were replaced right before the car was rebuilt.
* Converted to a Deka ETX-16 battery, located behind the driver.
* Car will come included with 6 snow-tires and appropriate 5-star Mazda wheels.
* Manual brake conversion with Porterfield R1S pads up front.

## Safety / Interior

* Clean RallyAmerica logbook. No "to do" notes from any of the rallies on this chassis.
* Two up-to-date Cobra Monaco Pro seats. One red Sparco Evo is pictured but not included as it is on loan from a friend.
* A full TRS Rally "Starter Kit": Belts, helmet hammock, spare tire hold down.
* Triangles, First Aid, spill kit all up to date.
* Cage is TIG welded except for the footings.
* The dash, center console, and doors have all been made to fit around the cage giving it a nice feel inside.
* Very durable front tow hook bolted directly to the frame.
* The gas tank has been "covered" with a shield per RallyAmerica rules.
* Rally Armor mudflaps

## Spares

* 6 stock MX3 rims. I've been running protege 5-star rims. Both OEM style rims have held up extremely well even with snow tires on very rocky surfaces.
* 3 front bumper covers.
* 2 rear bumper covers
* 1 set of front fenders
* 2 spare doors (1 pass, 1 driver)
* 1 spare hatch (and these are *rare*)
* 1 spare parts engine (DE based not, ZE)
* 1 spare trans
* 2 factory strut/spring assemblies.
* 1 spare master cylinders
* Venerable stack of ECUs.
* A bad-day box containing: two new axles, two new ball joints, four tie-rod ends and two inner tie rods.
* Boxes of electronics, bolts, and miscellany from the previous chassis.
 

·
Registered
Joined
·
44 Posts
Me again,

Does anybody know of a shipping company that can send that car with the spares to MD?

The one we have used in the past is economical (about $600-$700) but the guy will not take a single spare with the car....

Anybody?
 

·
Registered
Joined
·
85 Posts
Check with Mr. Tim Regan, at Purpose Driven Transportation. His e-mail is [email protected]

Tell him Daniel at Novurania sent you his contact details. He ships a lot of my yacht tenders for me all over the country, and I have had multiple conversations with him about doing cars, and project cars for me on return trips.

You might have to wait for something that fits his schedule, and have the seller do a little boxing/palletizing; but he will take care of you, and his prices have been very competitive for my company, and my dealers.

Hope this helps.
 

·
Registered
Joined
·
11 Posts
Discussion Starter · #5 ·
the amount of spare parts included will not fit in the bed of a full size truck alone - would recommend renting a penske truck and trailer....
 

·
Registered
Joined
·
44 Posts
Yeah. I just cannot do a 2,300 mile trip (one way).....

It would just take way too long. But the car is worth the asking price for sure. Specially with the spares...

Good luck with the sale :)
 
1 - 7 of 7 Posts
Top