WTB VW 020 16V 3.94 or 4.20 Ring&Pinion
Results 1 to 10 of 10

Thread: WTB VW 020 16V 3.94 or 4.20 Ring&Pinion

  1. #1
    100 K left 2
    Join Date
    Jul 2015
    Location
    Fork Lake, AB
    Posts
    8

    Default WTB VW 020 16V 3.94 or 4.20 Ring&Pinion

    Needs to be 16V as the 4th gear spline diameter is different on the 8V stuff.
    Thanks in advance.

  2. Remove Advertisements
    SpecialStage.com
    Advertisements
     

  3. #2

    Default

    I think you'll have better luck on the VWvortex classifieds. Check out the MK2 classifieds and engine transmission classifieds below
    http://forums.vwvortex.com/forumdisp...on-Classifieds

  4. #3
    100 K left 2
    Join Date
    Jul 2015
    Location
    Fork Lake, AB
    Posts
    8

    Default

    Anyone, leads appreciated and will be followed up on!

  5. Remove Advertisements
    SpecialStage.com
    Advertisements
     

  6. #4
    100 oversquare right bentmettle's Avatar
    Join Date
    Dec 2004
    Location
    Ann Arbor, Michigan
    Posts
    3,460

    Default

    http://www.ebay.co.uk/sch/i.html?_fr...wheel&_sacat=0


    easier to install the 4th gear from an 8V than chase the 16V specific pinion probably.

  7. #5
    100 K left 2
    Join Date
    Jul 2015
    Location
    Fork Lake, AB
    Posts
    8

    Default

    Quote Originally Posted by bentmettle View Post
    http://www.ebay.co.uk/sch/i.html?_fr...wheel&_sacat=0


    easier to install the 4th gear from an 8V than chase the 16V specific pinion probably.
    I have a 1.43 4th so would have to be a super expensive custom gear and then I'd have a R&P that isn't nearly as strong as the motorsports stuff.

  8. #6
    100 K left 2
    Join Date
    Oct 2015
    Location
    USA, Binghamton NY
    Posts
    30

    Default

    What's the project?

  9. #7
    100 oversquare right bentmettle's Avatar
    Join Date
    Dec 2004
    Location
    Ann Arbor, Michigan
    Posts
    3,460

    Default

    Sorry, figured you were working on a rally car.

    I gave up on the 020 after our Hoer R&P died in 2012 or whenever it was.

  10. #8
    100 K left 2
    Join Date
    Jul 2015
    Location
    Fork Lake, AB
    Posts
    8

    Default

    Quote Originally Posted by DawsonE30 View Post
    What's the project?
    Mk2 for Stage Rally. Have a VWMS 16V gearset so need the 16V ring and pinion.

  11. #9
    100 K left 2
    Join Date
    Jul 2015
    Location
    Fork Lake, AB
    Posts
    8

    Default

    Quote Originally Posted by bentmettle View Post
    Sorry, figured you were working on a rally car.

    I gave up on the 020 after our Hoer R&P died in 2012 or whenever it was.
    I am, not sure what you mean by that. The 020 is plenty strong if its built right. And by built right I don't mean stock internals with some crazy high undercut pinion like a 4.8 or 5.07.

  12. #10
    100 K left 2
    Join Date
    Jul 2015
    Location
    Fork Lake, AB
    Posts
    8

    Default

    Bump!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •