Today, installed the steering wheel. (makes it way-easer to steer).I installed the clutch cylinder . Started on the struts.
Also tested ride height? Looks like I can make it work with a 12" x 2 1/2" spring of 300# ? What do you think ? The gray is the stand-in spring. Its 2 1/2" Electric PVC. Also helps with the scaling of the chassis. When your as cheep as me. Trying to keep the spring I can't use down. LOL
Struts are Impreza AGX. Lots of mods to make them work.
For today I pulled the motor, rapped the exhaust (lost the top cover when I cut the pipe!) with temp cover and 3 layers of Alum. rap. Didn't want to melt the P/S hoses. Cut down the stand rear leg by 1 3/8". Reinstalled the motor (stand worked just fine now) ! Pulled the exhaust header and reinstalled come clamps missing from inside the heat cover.Installed the drive shaft and covers. And also started installing the front A frames.
The new shocks got here and 2 are good and 2 are the wrong ones ! Its always the ones I need ! Going to do a mock up with pvc tubing to get the weights at the coners and then order springs.
I will install the rear struts and the maybe plug the motor into the harness and see what works ? Hope things go well ??
We are Global Online Quran Teachers, an educational organization that is located in Egypt and was set up in pursuit of spreading the Quran. We aim to teach the Best way to learn Quran Online with the Best Online Quran Teachers, Online Quran Classes