Impreza Rally Roll Cage Core Kit, $549!!!!!!
Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Impreza Rally Roll Cage Core Kit, $549!!!!!!

  1. #1

    Default Impreza Rally Roll Cage Core Kit, $549!!!!!!

    This is it folks, the mother of all price points for a rally roll cage kit in the USA. Many of you asked for it, here it is for just $549!

    http://www.safedrives.com/proddetail.asp?prod=CK1

    Currently this Autopower Super Race Roll Cage "Core Kit" is only available for Subaru Impreza 1993 to 2008+, all body types.

    This "Core Kit" includes all of the pre-bent tubes as seen in the Super Race Roll Cage. However nothing comes pre-welded when you purchase this Core Kit.

    All of the tubes included in this Core Kit are available separately.

    This Core Kit includes:
    Main Hoop = $189
    Front A Pillar Tubes; 1 Left side & 1 Right side. = $299
    Top Windshield Bar = $79

    This Core Kit includes only the above four components.
    Also available at an addition cost:
    Additional Tubing = $7 per foot or $21 per meter.
    Saddle Gusset = $7 each.
    Mounting Plates = $5 each, 6 inch by 6 inch.

    Please allow up to 4-6 weeks for delivery on this special order item.

    Shipping:
    Autopower roll bars and cage kits are sent via truck freight with the shipping charges being collected at the time of delivery. That means you pay the truck driver for whatever the shipping fees are when they deliver your roll bar. The buyer will pay all shipping charges. All you pay safedrives.com for today is the cost of the roll bar itself. A custom shipping quote can be provided by contacting us. All customer orders will have the least expensive shipping possible.

    How to order:
    Order online or over the phone at 877-739-1713.
    http://www.safedrives.com/proddetail.asp?prod=CK1
    To order online, click the above link and then:
    1) Click the, "Add to cart" button.
    2) Click the, "Check out" Button (Don't forget the Roll Bar Padding!).
    3) Enter your customer information.
    4) Enter your vehicle type in the "Additional Information." section.
    5) Click the, "Submit" Button.
    6) Finish the order process.

    ************************************************** ****

    I personally think that the full on Super Race Roll Cage Kit is the way to go (seen here), it just save so much time! However, this "Core Kit" I have had many requests for. Please let me know if you have any questions.
    Last edited by Safe Drives; 01-07-2010 at 03:18 PM.


    Best regards,
    Charles Buren
    www.safedrives.com
    877-739-1713 Toll Free

  2. Remove Advertisements
    SpecialStage.com
    Advertisements
     

  3. #2

    Default

    Bump! Any thoughts or feedback on this package you guys?


    Best regards,
    Charles Buren
    www.safedrives.com
    877-739-1713 Toll Free

  4. #3
    Rally, my drug of choice. mellow65's Avatar
    Join Date
    Oct 2006
    Location
    Portland, OR
    Posts
    799

    Default

    this isn't giving you full stage legality is it?
    G2 Mazdaru?!?!?! Build Thread


    "Rally racing makes a heroin addiction look like a vague craving for something salty"

  5. Remove Advertisements
    SpecialStage.com
    Advertisements
     

  6. #4

    Default

    Quote Originally Posted by Safe Drives View Post
    Bump! Any thoughts or feedback on this package you guys?
    *edit: never mind
    Last edited by Abington Rally; 07-04-2010 at 05:09 PM.

  7. #5

    Default

    Quote Originally Posted by mellow65 View Post
    this isn't giving you full stage legality is it?
    Hi,

    The "Core Kit" in the iriginal post is just the bent tubes that are part of the Super Race Roll Cage Kit.

    Quote Originally Posted by Abington Rally View Post
    For those looking to do their own cages and with only a limited about of fabrication tools, this seems like a good deal. The main hoop and a-pillar tubes and top windshield bar can be some of the toughest to fab. After those are done its much easier, in my opinion, to do all the straight tubes, at least those are only notching, not notching/bending. If I still have this GC shell kicking around in a few months, I may pick one up!
    Thanks for the feedback!

    As always, give me a call with any questions.


    Best regards,
    Charles Buren
    www.safedrives.com
    877-739-1713 Toll Free

  8. #6

    Default

    this is what i am looking for since i have access to welding but not bending. these kits fit in the 90-94 legacy chassis too, dont they?

    does the windshield bar have a bend in it? it is hard to tell in the pictures in the super kit.
    Last edited by Greg Donovan; 06-12-2010 at 07:31 PM.

  9. #7

    Thumbs up

    Quote Originally Posted by Greg Donovan View Post
    this is what i am looking for since i have access to welding but not bending. these kits fit in the 90-94 legacy chassis too, dont they?

    does the windshield bar have a bend in it? it is hard to tell in the pictures in the super kit.
    Hi Greg,

    Thanks for the questions.

    This kit should fit the legacy 90-94 with no trouble. If it does not fit the windshield then I'll give you a 100% refund or get you tubes that fit. I do know for a fact that the Bolt in Race Roll Cage from autopower will fit the (non sunroof)Legacy. I just have not yet had a person put the Super Race Roll Cage in a 90-94 Legacy.

    Will you be the first?




    ...



    ...




    Best regards,
    Charles Buren
    www.safedrives.com
    877-739-1713 Toll Free

  10. #8

    Default

    Why 1.75 x .120 everywhere?

  11. #9

    Default

    Quote Originally Posted by Sans Peur View Post
    Why 1.75 x .120 everywhere?
    It is possible to order this kit with 1.5" in the proper areas to meet Rally America Specifications.


    Best regards,
    Charles Buren
    www.safedrives.com
    877-739-1713 Toll Free

  12. #10

    Default

    Bumps for a great deal.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •