'tis the season to build rally Imprezas (or other cars but, this thread is for Impreza owners.)
Available Now for all 1993 to 2011 Subaru Imprezas; sedan, wagon and coupe are all ok!
This is a complete Weld In Roll Cage Kit that if installed properly*, will pass scrutineering / tech at any race track or rally race event in North America.
All tubes are made from 1.75" OD x 0.120" thick DOM seamless steel.
All tubes are pre-bent to fit very close to the body shell. Your vehicles interior will need to be modified or removed. This kit IS designed to clear the stock front seats.
All tubes and gussets in the main hoop will come pre-welded exactly as seen in the images.
Both rear down tubes come pre fitted so that the main hoop can easily be installed.
All other tubes will come with at least one end of the tube pre-notched. As with any Weld In Roll Cage, final fitting and welding is required.
All Mounting Plates are included. These Mounting Plates are high quality, pre-fabricated units.
All pictured Taco Style Gussets are also included in this kit. Also, 4 additional Taco Gussets are included that are not pictured. These additional 4 Taco Gussets are for use on the door "X" braces.
$1449 + Shipping** LINK
Cage Images courtesy of Jim_Rippy. Thanks!
This main hoop is completely prefabricated!
The latest version of this kit includes a bend in the A Pillar Support Brace to help clear the steering wheel. Gussets for doorbar X is included but not shown in this image.
Below images courtesy of Autopower.
Again, Taco Gussets for the door "x" braces are included.
Included mounting plates.
Watch this space for more info!
* Additional tubes or gussets may be required, please check your rule book.
**Free shipping is only for lower 48 USA.