Search:

Glad to have you aboard. Quiet for long stretches of time here, and then all of a sudden there will be a flurry of real interesting information. Then quiet again. Its a strange site that way.

Start with a type 4 bus motor or a 914 2.0 with the Porsche transmission as your starting point, and reliability issues will be much less with a stronger torque band across the entire rev range. Over...

Frankus;

Please e-mail me at [email protected], with a list of any GTX or GTR parts available, if you have any in your piles. Or even Protege parts that may retrofit. I have recently...

A rather vague question, indeed. Do you want to be a team owner? A driver? A co-driver? Crew member? If driver or team owner, do you already have a car? Built, or needing to be built? If yes, then...

Welcome aboard. The SCCA central florida region is very active in Rallycross, and is hosting the DirtFish SouthEastern Division Championship next weekend; (07/20-07/22), at Sebring. You should come...

Nuuke;

Welcome aboard. Good to see you here. Great site with lots of information, though you have to use the search feature a lot, as the site is not nearly as active as it was years ago.

The...

Correct. Mine is the hydraulic clutch, with cable shift. If you can find a gear ratio code chart on-line, my box and spare are "EGT" coded.

Frank;

Here's basics on the Mk. 4 stuff. Not the same as the Mk. 3, but if you pull up a trans chart, you can find a trans code with a good selection, and then start searching junkyards and...

Frank, what series VW are you running? Mk. 2, 3, 4, etc... Which engine? Final drives are going to be different between a 2.0 ABA motor to a VR6, to a 1.8 T. For example, I run an Audi TT AMU code...

Cool period item. Good luck with the auction.

For stand-offs, I would use 1/4" to 3/8" Butyl rubber sheeting, cut into strips. Easy to shape around weird shapes and curves, and easy to attach to tank with contact cement, before final mounting of...

I build boats for a living, and run a manufacturing facility. I have had over twenty years experience with fiberglass and approximately 5 with carbon and kevlar. For what you are looking at using it...

Have sent multiple e-mails to the address listed in the above post, with no response. Is the 303 still available?

Do spectators at RA events have to sign a liability waiver, like the ones that are needed at SCCA events? If so, by signing the waiver to be a spectator, he/she has agreed to abide by the rules of...

Radi;

If I were putting it on a street driven daily driver, I might go Amber. But with the R-X car being strictly track only, I went white. For you, now that you are caged, I would definitely go...

Radi;

You saw my SS18 mounted on the GTI-TT at the last night event, so you know how much light it puts out. Highly recommended. The one I ordered and use is the SS18 in combo. I will be ordering...

Here you go, Codylop.
Fully vetted and legal, with fully stamped logbook. Just lowered to 10.5 or 13 with the trailer. Spares package as well.

http://www.rallyanarchy.com/phorum/read.php?7,116083

Codylop;

I bought a completely custom made HotBits suspension for much less than the competition, and it is very good. I bought two sets of springs, using one for rallycross, and another for rally...

RallyCross is just the beginning. Team O'Neil was a great start, and will get your basics honed nicely. The 3 day school definitely was the right way to go, as the 1 day is just basics that most car...

If you can find a Mk. 4 Jetta or Golf with the 2.0 ABA motor, those would be good starter cars for you. The 2.0 4's are plentiful and cheap. And the Mk. 4 chassis was the first to come from the...

Welcome aboard. What are your interests?

Just two of them stacked, to mount in the center. I will not need four of them. So basically one side of the pictured set-up.

If it does not work for SEEBO, PM me, and I'll call dibs on it. My L helmets all fit way too snug, and my newest Motorcycle helmet (HJC) is an XL and fits perfectly. Just let me know.

I would like to order the combo platform SS18 led bar, for night time rally cross events. I notice you do not yet offer a bracket or mounting kit for the SS18 yet. Do you know when one will be...

I just found this thread when you updated it Dante. How depressing that he had such a great start to the thread, and then it just dissapeared. It looked lie it was definitely going in the right...